|
|
|
 | |
This is for pointing your satellite dish and finding the satellite quickly without a receiver. Without this the installation could take hours. It has a dial to control the sensitivity which is needed to fine tune after finding the satellite. It comes in a vinyl case with a battery pack, adapter, 6 inch coax cable and compass. Everything you need to point a dish without the receiver. |
|
|
|
Features |
| |
. Comes with everything needed to point a dish without a receiver, battery pack, adapter, 6 inch coax cable, compass in a vinyl case.
. Small and light durable ABS plastic construction
. Only 4" x 2.5" x 1.5"
. Has sensitivity control dial, a must for fine tuning after satellite is found
. Has background light to indicate it is on, and for installation in the dark
. Extremely sensitive and much faster response compared to receivers signal strength or quality indicator.
. Satellites are found literally in seconds with this meter after coordinates are set on dish. Just set elevation, move left right till you get signal, this method literally takes seconds. Fine tuning will take about 2 minutes. For your coordinates click here.
| | |
| Specifications |
| Frequency Range |
950-2400 MHz |
| Gain (dB) |
10 dB + 4 dB |
| Sensitivity Control |
12 dB + 4 dB (LNB Gain=55 dB C/N=15 dB) |
| Power Supply |
DC 9-18V |
| Power Drain (mA) |
60mA (satellite Finder Only) |
| Operation Range (input)(dB) |
62-80 dB (LNB Gain=55-60 dB) |
| Connector (Input/Output) |
F Type Female |
| Impedance |
75 Ohms |
| Dimensions (mm) |
100 x 65 x 40 |
| LENSATIC COMPASS |
| Direction Accuracy |
+5 |
| Direction Indication |
2 /Scale |
| Dimensions (mm) |
75 x 55 x 30 |
|
|
