|
|
|
 | |
Not enough can be said about this tool. It is the tool that professional installers, use, it can detect which satellite it's pointed at, among a long list of other features. It's software is programmable to accept updates. It is ergomonmic, and it's LCD screen is placed where it is for hands free operation, it's menus can be accessed using the 3 buttons which only takes 1 hand aswell. Read The Features below for further description. |
|
|
|
Features |
| |
. Precise satellite identification in both the C band and Ku band ranges.
. Programmable, user friendly and ideal for installation of VSAT, internet-over-satellite systems as well as the digital television antenna. DiSEqC compatibility, positive satellite identification, and pinpoint accuracy. This the tool that professionals use. An ergonomically angled screen that maximizes visibility and enables hands-free use. The meter is operated using a three button control panel and the vital tasks can be completed with one hand. Four line LCD panel with backlight, giving readings of both Signal Strength and Picture Quality (BER) together.
. Fully upgradeable software.
. Easy selection and identification of chosen satellite
. Compatible with all transmissions: Ku and C band DVB and DSS
. Can be calibrated to suit local BER & Signal Strength conditions
. Picture quality measurement to maximize the accuracy of both cross-polarity and pointing accuracy.
. Removable 'F' connector
. Removable NiMH high-capacity battery
. Recharge in the field using car lighter adapter.
. LNB short circuit protection
. LNB power supply
. Alignment to the correct satellite first time, every time.
. Control of 22kHz and DiSEqC-type switches.
. Simple use with a three-button control panel.
. Robust and lightweight. The unit weighs less than one kilo (2.2 lbs)
. Simple to operate
. Align Dish without receiver hook-up click here. | | |
| Specifications |
| RF PARAMETERS |
| Input Signal Frequency |
950MHz~2150MHz |
| LNB Service Voltage |
13V/18V |
| LNB 22 KHz Switch ON/OFF |
(0.6VDC at 50% Duty
cycle) |
SATELLITE DIGITAL RECEIVER
PARAMETERS |
| Regional Settings |
Up to 6 Languages or
Geographical Areas |
| Maximum Data Locations |
120 transponders from any
satellite combination |
| Satellite Identification |
Only Chosen Satellite is
found by UIS |
| Reception Standard |
DVB or DSS
(selectable) |
| Modulation Standard |
QPSK |
| Symbol Rate |
3~40 MBIT/S |
| LNB Polarization Voltage Control |
13V/18V (short-circuit
self-protection) |
| LNB 22KHz Control |
ON/OFF (0.6VDC at 50% duty
cycle) |
|
| Screen
Size |
66.5mm x 25mm |
| No.
Characters |
64 (4 x 16) |
POWER CONSUMPTION |
| Whole Power Consumption |
600mAh |
| Input Voltage |
12V DC |
| Available Usage (Full Charge) |
3 Hours
Continuous |
POWER ADAPTER PARAMETERS |
| Power Service Voltage |
AC 110V 50-60
Hz |
| Output Voltage |
12V DC |
| Output Current |
400mAh |
| In-car Charging |
12V DC Cigarette Lighter
Power Adapter |
| Charge
Time |
10 Hours to
90% |
OPERATING CONDITIONS |
| Operating Temperature |
0C~80C |
| Relative Humidity |
10%~90% |
| Atmosphere Pressure |
86Kpa~106Kpa |
| Dimensions |
208mm x 86mm x
56mm |
| Weight |
580 grams |
|
|
